ABAQUS中隐式和显式的节点和单元的输出变量解析

The output variables listed below are available in Abaqus/Explicit.

Mechanical analysis–nodal quantities

CFORCE

Field: yes  History: no  .fil: no  

Contact normal force (CNORMF) and frictional shear force (CSHEARF).

CDISP

Field: yes  History: no  .fil: no  

Contact opening (COPEN) and accumulated tangential motions (CSLIP1, CSLIP2, and

CSLIPEQ) for general contact analyses.

CEDGEACTIVE

Field: yes  History: no  .fil: no  

Status of contact edges for general contact analyses (active as primary, active as

secondary and deactive).

CFRICWORK

Field: yes  History: no  .fil: no  

Contact frictional work for general contact analyses.

CNAREA

Field: yes  History: no  .fil: no  

Contact nodal area for each node with active contact forces in general contact, based on

area contributions from adjacent surface facets projected to a plane perpendicular to the

current nodal contact normal force vector.

CORIENT

Field: yes  History: no  .fil: no  

Surface tangent directions (CORIENT1 and CORIENT2) for general contact analyses.

CSLIPR

Field: yes  History: no  .fil: no  

Instantaneous contact slip rates (CSLIPR1, CSLIPR2, and CSLIPRMAG) for general contact

analyses.

CSTATUS

Field: yes  History: no  .fil: no  

Contact status for general contact analyses.

CSTRESS

Field: yes  History: no  .fil: no  

Contact pressure (CPRESS) and magnitude of the frictional shear stress (CSHEARMAG) for

general contact analyses.

Contact pressure (CPRESS) and frictional shear stresses (CSHEAR1 and CSHEAR2) for

contact pair analyses.

CTANDIR

Field: yes  History: no  .fil: no  

Instantaneous contact tangent directions (CTANDIR1 and CTANDIR2) for general contact

analyses.

CTHICK

Field: yes  History: no  .fil: no  

Contact thickness for general contact analyses.

CSMAXSCRT

Field: yes  History: no  .fil: no  

Maximum value of the maximum stress-based damage initiation criterion for cohesive

surfaces in general contact up to the current increment.

CSQUADSCRT

Field: yes  History: no  .fil: no  

Maximum value of the quadratic stress-based damage initiation criterion for cohesive

surfaces in general contact up to the current increment.

CSMAXUCRT

Field: yes  History: no  .fil: no  

Maximum value of the maximum separation-based damage initiation criterion for cohesive

surfaces in general contact up to the current increment.

CSQUADUCRT

Field: yes  History: no  .fil: no  

Maximum value of the quadratic separation-based damage initiation criterion for cohesive

surfaces in general contact up to the current increment.

CSDMG

Field: yes  History: no  .fil: no  

Damage variable for cohesive surfaces in general contact.

FSLIP

Field: yes  History: no  .fil: no  

Length of contact slip path at secondary nodes during contact (FSLIPEQ) and in some

cases (see About contact pairs in Abaqus/Explicit) components of net contact slip in local

tangent directions (FSLIP1 and FSLIP2). These variables remain constant while a

secondary node is not in contact.

FSLIPR

Field: yes  History: no  .fil: no  

Magnitude of contact slip rate at secondary nodes during contact (FSLIPR) and in some

cases (see About contact pairs in Abaqus/Explicit) components of contact slip rate in local

tangent directions (FSLIPR1 and FSLIPR2). These variables are set to zero while a

secondary node is not in contact.

BONDSTAT

Field: no  History: yes  .fil: no  

Spot weld bond status.

BONDLOAD

Field: no  History: yes  .fil: no  

Spot weld bond load.

CFORCEC

Field: yes  History: no  .fil: no  

Consistent contact normal force (CNORMFC) and frictional shear force (CSHEARFC) in

general contact with active C3D10 elements.

Crack bond failure quantities

DBT

Field: yes  History: no  .fil: no  

Time when bond failure occurs.

DBS

Field: yes  History: no  .fil: no  

All components of remaining stress in the failed bond.

DBSF

Field: yes  History: no  .fil: no  

Fraction of stress that remains at bond failure.

BDSTAT

Field: yes  History: no  .fil: no  

Bond state (the state is 1.0 if bonded, 0.0 if unbonded).

OPENBC

Field: yes  History: no  .fil: no  

Relative displacement behind crack when fracture criterion is met.

CRSTS

Field: yes  History: no  .fil: no  

All components of critical stress at failure.

ENRRT

Field: yes  History: no  .fil: no  

All components of strain energy release rate.

EFENRRTR

Field: yes  History: no  .fil: no  

Effective energy release rate ratio

Mechanical analysis–whole surface quantities

CFN

Field: no  History: yes  .fil: no  

Total force due to contact pressure (CFNn, n = 1, 2, 3).

CFNM

Field: no  History: yes  .fil: no  

Magnitude of total force due to contact pressure.

CFS

Field: no  History: yes  .fil: no  

Total force due to frictional stress (CFSn, n = 1, 2, 3).

CFSM

Field: no  History: yes  .fil: no  

Magnitude of total force due to frictional stress.

CFT

Field: no  History: yes  .fil: no  

Total force due to contact pressure and frictional stress (CFTn, n = 1, 2, 3).

CFTM

Field: no  History: yes  .fil: no  

Magnitude of total force due to contact pressure and frictional stress.

CMN

Field: no  History: yes  .fil: no  

Total moment about the origin due to contact pressure (CMNn, n = 1, 2, 3).

CMNM

Field: no  History: yes  .fil: no  

Magnitude of total moment about the origin due to contact pressure.

CMS

Field: no  History: yes  .fil: no  

Total moment about the origin due to frictional stress (CMSn, n = 1, 2, 3).

CMSM

Field: no  History: yes  .fil: no  

Magnitude of total moment about the origin due to frictional stress.

CMT

Field: no  History: yes  .fil: no  

Total moment about the origin due to contact pressure and frictional stress (CMTn, n = 1,

2, 3).

CMTM

Field: no  History: yes  .fil: no  

Magnitude of total moment about the origin due to contact pressure and frictional stress.

CAREA

Field: no  History: yes  .fil: no  

Total area in contact.

XN

Field: no  History: yes  .fil: no  

Center of the total force due to contact pressure (XNn, n = 1, 2, 3).

XS

Field: no  History: yes  .fil: no  

Center of the total force due to frictional stress (XSn, n = 1, 2, 3).

XT

Field: no  History: yes  .fil: no  

Center of the total force due to contact pressure and frictional stress (XTn, n = 1, 2, 3).

Fully coupled temperature-displacement analysis

HFL

Field: yes  History: no  .fil: no  

Heat flux per unit area leaving the surface.

HFLA

Field: yes  History: no  .fil: no  

HFL multiplied by the nodal area.

HTL

Field: yes  History: no  .fil: no  

Time integrated HFL.

HTLA

Field: yes  History: no  .fil: no  

HTL multiplied by the nodal area.

SFDR

Field: yes  History: no  .fil: no  

Heat flux per unit area due to frictional dissipation.

SFDRA

Field: yes  History: no  .fil: no  

SFDR multiplied by the nodal area.

SFDRT

Field: yes  History: no  .fil: no  

Time integrated SFDR.

SFDRTA

Field: yes  History: no  .fil: no  

SFDRT multiplied by the nodal area.