Abaqus空气弹簧充气仿真视频教程

老师你的联系方式有吗？

为什么这个腔点选择 不了

这个模型只有在0.2Mpa气压下才能正确运行

Slave surface assembly_rubber-1_shang_cns_ is a node-based surface used with surface to surface approach. In order to obtain improved stress accuracy with this approach, an element-based surface should be used instead. For *tie pair (assembly_rubber-1_shang_cns_-assembly_gaiban-1_shang_cns_), not all the nodes that have been adjusted were printed. Specify *preprint,model=yes for complete printout. Slave surface assembly_rubber-1_xia_cns_ is a node-based surface used with surface to surface approach. In order to obtain improved stress accuracy with this approach, an element-based surface should be used instead. For *tie pair (assembly_rubber-1_xia_cns_-assembly_huosai-1_xia_cns_), not all the nodes that have been adjusted were printed. Specify *preprint,model=yes for complete printout. The surface assembly_rubber-1_nei is not completely enclosed. A list of element with free edges on this surface is given as follows: Boundary conditions are specified on inactive dof of 1294 nodes. The nodes have been identified in node set WarnNodeBCInactiveDof. The strains are so large that the program will not attempt the hyperelasticity calculation at 6 points

有结果的图吗

请问里面有刚度强度频率的分析吗

可以的。